Yamaha AW2816 Operation Manual page 2

2
Hold down the [SHIFT] key and press the
[F1] (Backup) key.
A popup window will appear, allowing you to
back up the I/O card settings.
3
Move the cursor to the MEM.BANK button,
and press the [ENTER] key.
If the memory bank already contains data, the
bank name will be displayed. If it does not contain
data, the display will indicate "NO DATA!"
The bank name is assigned automatically according to
the type of I/O card installed. It is not possible for you
to edit this name.
4
To execute the backup, move the cursor to
the OK button and press the [ENTER] key.
The settings of the I/O card will be saved in the
current song.
Restoring to an I/O card
When an AW2816 scene is recalled (or when a song is
loaded), the MEM.BANK settings are automatically
restored to the I/O card in option slot.
However if necessary, you can also perform the restore
operation manually. The procedure is as follows.
1
Press the [PATCH]
Plug-in page.
2
Hold down the [SHIFT] key and press the
[F2] (Restore) key.
A popup window will appear, allowing you to
restore the I/O card settings.
3
Move the cursor to the MEM.BANK button,
and press the [ENTER] key.
If the memory bank already contains data, the
bank name will be displayed. If it does not contain
data, the display will indicate "NO DATA!"
4
To execute the Restore operation, move the
cursor to the OK button and press the
[ENTER] key.
The saved settings will be loaded into the I/O card.
[F4] key to access the