Polaris RZR 570 2017 Owner's Manual For Maintenance And Safety page 121

Lights
Brake Lights
When the brake pedal is depressed, the brake light comes on. Check the
brake light before each ride.
1. Turn the ignition switch to the LIGHTS ON position.
2. Apply the brakes. The brake light should come on after about 10
mm (0.4 in.) of pedal travel. If the light doesn't come on, check the
bulb.
Vehicle Immersion
NOTICE: If your vehicle becomes immersed, major engine damage can result
if the machine is not thoroughly inspected. Take the vehicle in for
service before starting the engine. Your POLARIS dealer can provide
this service.
If it's impossible to take your vehicle to a dealer before starting it,
follow the steps outlined below.
1. Move the vehicle to dry land.
2. Check the air box. If water is present, dry the air box and replace the
filter with a new filter. Thoroughly dry the air pre-filter. See pages
106-107.
3. Remove the spark plug.
4. Turn the engine over several times.
5. Dry the spark plug and reinstall it, or install a new plug.
6. Attempt to start the engine. If necessary, repeat the drying
procedure.
7. Take the vehicle in for service as soon as possible, whether you
succeed in starting it or not. Your POLARIS dealer can provide the
required service.
8. If water has been ingested into the PVT follow the procedure on
page 105 for drying.
MAINTENANCE
117