Honeywell VIP7201 Setup Manual page 2

SUBJECT
Setup Procedures
SETUP GUIDE FOR
VIP7201 DISPLAY TERMINALS
The following notice is provided in accordance with the United States Federal
Communications Commission's (FCC) regulations.
Warning: This equipment generates, uses, and can radiate radio frequency
energy and ifnot installed and used in accordance with the instructions manual,
may cause interference to radio communications.
It
has been tested and found
to
comply with the limits for a Class A computing device pursuant to Subpart J of
Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference when operated in a commercial environment. Opera-
tion of this equipment in a residential area is likely to cause interference in
which case the user at his own expense will be required
to
take whatever
measures may be required to correct the interference.
ORDER NUMBER
CP91-00A
PART NO. 71017772-101 December 1982
Honeywell