Before Operation; To Open And Close The Disc Compartment Lid; Remove The Cap Over The Objective Lens; To Insert And Remove The Videodisc - Sony LDP-1000A Operating Instructions Manual

Videodisc player
Hide thumbs Also See for LDP-1000A:
Table of Contents

Advertisement

BEFORE OPERATION
TO OPEN AND CLOSE THE DISC COMPARTMENT LID
To open
1.
Plug the ac power cord into a wall outlet.
2. Press the POWER button.
3. Press the OPEN button.
The lid will unlock and lift up slightly.
4. Lift up the lid all the way. Be careful not to force the lid
beyond its normal open position.
0
To close
Push the lid down firmly so that the latch locks securely.
If the lid does not open
1.
Turn the power off.
2. While pressing the OPEN button, press the POWER but
ton again.
• If the lid still does not open, contact your Sony dealer.
REMOVE THE CAP OVER THE OBJECTIVE LENS
A cap has been put on the objective lens at the factory to
protect the lens from damage and dust.
Open the disc compartment lid and remove the cap.
lens cap
This cap should be saved for the later use when the player is
shipped again or is not to be used for an extended period of
time. Save the cap by putting it over the projection on the lid.
12
TO INSERT AND REMOVE THE VIDEO DISC
To insert
1.
Open the disc compartment lid.
2.
Place the disc with the desired program label up and
install it to the center wheel firmly.
~ '
1~11
=
3. Close the lid.
The disc will start rotating. The STANDBY lamp will blink
for several seconds, then will go off to show that the
player is ready to play.
To remove
1. Press the OPEN button when you want to stop playing
the disc, no matter what mode the player is in.
The disc will stop rotating and the lid will unlock and lift
up slightly.
2. Lift up the lid all the way.
3. Remove the disc, holding it by the rim.
4. Close the lid

Advertisement

Table of Contents
loading

Table of Contents