Dsw5; Dsw6; Dsw7; Led Indication - Hitachi YUTAKI M RASM-3WF2E Installation And Operation Manual

6.2.1.5 DSW5
◆ Terminal resistance

DSW5

Factory setting
Fuse recovery
6.2.1.6 DSW6
◆ No setting is required

DSW6

Factory setting
6.2.1.7 DSW7
◆ Function selection

DSW7

Factory setting
Open valves (when DSW1 for test run pin 4 is switched ON)
6.2.1.8 LED indication
Name Colour
LED1 Red
LED2 Yellow
LED3 Green
PMEN0657 rev.0 - 02/2024
This LED indicates the transmission status between the indoor unit and the unit
controller
This LED indicates the transmission status between the indoor unit and the
outdoor unit
Power source for the PCB
RASM-(3/4)WF2E
Not applicable
RASM-(3/4)WF2E
RASM-(3/4)WF2E
Indication
1 2 3
6
53