Middle frame assembly
Removing the middle-frame assembly
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
hard
drive.
6. Remove the
system-board
7. Remove the
media-card
8. Remove the fan.
9. Remove the
memory
module.
10. Remove the
wireless
card.
11. Remove the
retractable-camera
12. Remove the
M.2 2230 solid-state drive
13. Remove the
integrated heat sink
14. Remove the
system
board.
15. Remove the speakers.
16. Remove the microphones.
17. Remove the
stand
hinges.
18. Remove the
power-button board with
19. Remove the
display
panel.
About this task
The following image indicates the location of the middle-frame assembly and provides a visual representation of the removal
procedure.
Figure 67. Removing the middle-frame assembly
Before working inside your
shield.
reader.
assembly.
or,
M.2 2280 solid-state
or,
discrete heat
USB.
computer.
drive, which ever applicable.
sink.
Removing and installing Field Replaceable Units (FRUs)
95