Adjusting The Operator's Seat; Fastening The Retractable Seat Belt - Cub Cadet Yanmar SC2400 Operator's Manual

2. Sit on the seat.

■ Adjusting the Operator's Seat

1. Engage the parking brake securely and stop the
engine.
2. Sit on the seat.
3. Pull the seat adjustment lever to the left.
4. Move the seat forward and backward to find the
optimal position and then release the seat
adjustment lever.
5. While remaining seated, confirm that various
control levers can be comfortably operated. If any
control lever cannot be operated comfortably,
readjust the seat position as necessary.
(A) Seat adjustment lever

■ Fastening the Retractable Seat Belt

WARNING
Avoid injury:
●While operating the tractor, make sure to keep
the seat belt fastened with the Roll-Over
Protective Structure (ROPS) equipped. This will
reduce the possibility of injury or death in the
event of an accident such as an overturn or
roll-over.
●NEVER use the retractable seat belt when
operating the tractor without the Roll-Over
Protective Structure (ROPS).
1. Draw out the right and left segments of the
retractable seat belt from the retracted positions
on both sides of the operator's seat.
2. Connect both segments of the belt with the
buckle, being careful to avoid twisting of the belt,
adjust the belt length, being suitable for the
operator.
(A) Buckle
(a) Adjust the belt length
WARNING
●If the retractable seat belt is situated far away
from the operator's abdominal area, a
dangerous situation can be present in the event
of an accident. ALWAYS ensure that the
retractable seat belt is in the lowest possible
position to the operator's abdominal area.
●The retractable seat belt must be used by the
operator only. NEVER use the retractable seat
belt for two or more persons or to hold an
object to the operator.
7. OPERATING THE ENGINE
3014904a
(A)
A3013712
7-2
(A)
(a)
Sc2400 Operator's Manual