Multi Track Recording - Yamaha Portatone PSR-640 Owner's Manual

Song Recording

Multi Track Recording

1 3
-
Use the same operation as in "Quick Recording" (page
94).
4
Press the [NEXT] button to display the FILE selection screen.
5
Press the [NEXT] button.
6
Select "Multi Track."
Use the data dial, the [+/YES] button or the [-/NO] button.
7
Press the [NEXT] button three times to display the PART
setting screen.
8
Select the desired track and part for recording.
1) Select a track.
Press one of the [TRACK1]-[TRACK16] buttons.
2) Select a part.
Use the data dial, the [+/YES]
button or the [-/NO] button.
3) Set the desired track to
"REC."
Press the [NEXT] button and use
the data dial, the [+/YES]
button or the [-/NO] button.
• Make all necessary settings to each track by repeating steps 1) through 3)
above.
96
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
[BACK] button [NEXT] button
• For information on the punch
in and start measure
functions, see pages 98.
• For information on track
assignments, see page 93.
• To record auto accompani-
ment data, set the [ACMP]
button to ON.
• The same part cannot be set
to more than one track for
recording.