Mains On/Off; To Switch On/Off With Remote Control Handset - Sanyo 14MT2 Instruction Manual

@ Mains On/Off
@ To switch On/Off with Remote Control Handset
™ To turn the TV set ON, press the Mains ON/OFF © switch
on the front of the TV.
The power indicator illuminates red to show the power is on.
@ To turn the TV set OFF, press the Mains ON/OFF (@)
switch again.
If no picture appears but the power indicator is on, press the
() PA, PY, or 0 - 9 button as the TV set is in the standby
mode.
™@ To switch the TV set into the standby mode, press the (')
button.
The red power indicator illuminates more brightly.
lM To switch the TV set ON from the standby mode, press any
of the following buttons;
('), PA, P ¥V buttons, 0 - 9 Numeric buttons .
lf you found a power indicator flashing, please turn
e TV set off completely with the Mains ON/OFF
o switch and contact our service desk. This
warning is a sign to let you know that the power
rotection function of this TV set is now operating.
@# Mains ON/OFF © switch must be in the ON position
before using the remote control handset.
@ Standby mode is used for switching the TV set off for
short periods of time. In standby mode the TV is switched
off but is still receiving mains power.
@ Auto Shut Off
This TV set will automatically switch into the standby mode, 10
-00
-
minutes after a signal is no ionger received. The time until the
Stand-by
coccce le
set will switch off is displayed on the screen.
function with no signal being received, the auto-shut off
function will be ignored.