Table of Contents
Advertisement
m NO PICTURE, NO SOUND
@ Check if TV is plugged in.
@ Try a different channel,
if OK,
probably station trouble.
m POOR PICTURE, SOUND OK
@ Adjust BRIGHTNESS control.
@ Adjust FINE TUNING control.
é d @ Check aerial connections
@ NO COLOUR, PICTURE OK
@ Adjust COLOUR control.
@ Adjust FINE TUNING control.
@ |s the programme in colour ?
Your television is fully transistorised
and
does
not
contain
any
user
serviceable components.
Removal
of the cabinet
cover
may
expose you to dangerous voltages.
Refer all servicing to qualified service
personnel.
Unplug the television receiver from the
wall outlet and
refer servicing
to
qualified service personnel under the
iol
feh ii iare mereyaleli (relates
™ If the power cord or plug is damaged.
if liquid has been spilled into the television receiver.
Ml if the television receiver has been dropped or the cabinet
has been damaged.
following the operating instructions.
television receiver to normal operation.
@ WEAK PICTURE
@ Check aerial connections on back
of set.
@ Check aerial for broken wires.
@ Re-orient aerial.
H The following faults are not
caused by the receiver:
When
replacement parts are required, have the service
technician verify that the replacements he uses have the
same safety characteristics as the original parts. Use of
manufacturers specified replacements can prevent fire,
shock or other hazards.
"GHOSTS"
Reflections of signals from mount-
ains or high buildings will cause
multiple images, called "Ghosts".
These abnormal conditions can be
reduced to minimum by repositioning
aerial or by installing a new one
suited for your area.
"INTERFERENCE"
Interference
may
be caused
by
electrical appliances,
car ignition
systems, etc. This should normally
be a temporary condition, but should
this interference persist, contact your
dealer.
25
Advertisement
Table of Contents
