Do you have a question about the RIVELIA and is the answer not in the manual?
Questions and answers
Сазида
February 26, 2025
Как снять варочный блок для чистки
1 comments:
Mr. Anderson
February 26, 2025
To remove the brewing unit for cleaning on the DeLonghi Rivelia:
1. Ensure the machine is completely turned off and unplugged. 2. Pull out the water tank and remove the lid. 3. Squeeze the red levers of the brewing unit inward while pulling it out. 4. Rinse off any coffee pulp gently. 5. Submerge the unit in water for 5 minutes (do not use any cleaning solution). 6. Take it out, wipe it dry with a paper towel, and avoid touching the metal filter. 7. Clean the cavity before reinserting the unit. 8. Reinsert the unit until it snaps into place. 9. Clean and reattach the lid, then put the water tank back.
The brewing unit should be cleaned every month.
This answer is automatically generated
Valerie Ross
April 9, 2025
I have muddled up my coffee settings sometimes it can’t complete as it’s too strong where can I find the factory settings?
It a rivella
John Galpin
April 11, 2025
I wish to get a printed book Copy of the Manual
BOB MCKEOWN
April 21, 2025
Is there any way of turning on illumination on the ON/OFF switch?
Contents Rivelia Contents RIVELIA DESCRIPTION OF THE MACHINE ..............4 RIVELIA DESCRIPTION OF PANEL AND HOMEPAGE ............6 RIVELIA DESCRIPTION OF ACCESSORIES ..............7 RIVELIA USING THE MACHINE FIRST TIME ..............8 Select your language ....................8 Select the day and time ..................9 Fill the water tank ....................9...
Page 3
RIVELIA INDICATIONS FOR MAKING COFFEE-BASED DRINKS ........23 Tips for a hotter coffee ..................23 RIVELIA BEAN ADAPT TECHNOLOGY ................. 24 RIVELIA COFFEE ROUTINE ..................25 RIVELIA STEAM BUTTON: FOR FROTHING MILK ............26 Which milk to use? ....................26 Frothing milk or vegetable drinks .................26 Making hot milk (not frothed) ................27...
Description of the machine Rivelia Beans container with lid Lid covering measure housing/pre-ground coffee compartment Coffee spouts (height-adjustable) Steam wand/hot water spout Drip tray Power cord Water tank with lid Infuser assembly access flap (accessible when water tank is removed)
WATCH THE VIDEO HERE Description of panel and homepage Rivelia Steam Coffee ON/Standby button Drink selection button Steam/Hot water function button. Profile selection button Espresso Espresso Coffee Americano lungo Selected profile Coffee Routine Bean Adapt Technology Filter spent indicator Descale warning indicator...
Description of accessories Rivelia Decalci cante per macchine da ca è Descaler for co ee machines Détartrant pour machines à café Entkalker für Ka eemaschinen De’Longhi Appliances s.r.l. Via L. Seitz, 47 31100 Treviso - ITALY Tel. +39 0422 4131 5413218631/04.15...
1. Connect the power cord to the mains supply (fig. 1). The machine switches on and will show you how to set it up the way you prefer: follow the instructions displayed and the Rivelia will be ready for use! Here are the essentials:...
Select the day and time 4. Select the exact day and time and press “Next”: select the day and time display format and press “Next". Fill the water tank 5. Detach the water tank. Please note: Tilt the water tank slightly to ensure that it separates correctly from the machine (fig.
Tips Tips for use will appear on the display. Read them carefully: they will be of help when using the machine. Press “Next” to continue. Check the hardness of the water The machine will prompt for descaling to be carried out after a prede- termined period of time based on a nominal water hardness setting.
WATCH THE VIDEO HERE Profiles 1. Set the number of users for this machine. Press "Next". 2. To customize the number, press on the profile icon, make the choices, then press the button showing the name, press “Change”, and finally press "Next". 3.
Switching on the machine Rivelia Please note: • The first time the machine is used, it will be necessary to make 4-5 cappuccinos before the drink in the cup tastes as it should. • The first time the machine is used, the water circuit will be empty and operation could be very noisy.
Switching off the machine Rivelia Whenever the machine is turned off after being used to make coffee, it will run a rinse cycle automatically. 1. To turn the machine off, press the button (fig.10). 2. If envisaged, the machine runs a rinse cycle, delivering hot water from the coffee spouts , then switches off (stand-by).
Menu settings Rivelia Rinsing Using this function, hot water can be delivered from the coffee spouts to clean and heat the internal circuit of the machine. Place a container of at least 200ml capacity under the spouts (fig. 9). To activate this function, proceed as follows: 1.
To programme Auto-off, proceed as follows: 1. Press to access the settings menu (fig. 11). 2. Scroll through the pages until the item “Auto-off” is displayed; 3. Select the desired time interval (15 or 30 minutes, or 1 or 3 hours). 4.
Please note: The effect of varying the temperature is most noticeable with long drinks. Bean Adapt Technology We suggest accessing Bean Adapt Technology from the homepage, so that this parameter can be set as appropriate for the particular coffee bean used. Statistics This function displays statistics relating to the machine.
2. Scroll through the pages until the item “Coffee mill settings” is displayed. 3. Press “Read more”; to watch tutorial on how to adjust the level of grinding. Press “Next" or “Back” to read the advice. 4. When at the final page, press “Ok” to go back to the settings menu. 5.
7. Once the rinse has been completed, remove the water tank (fig. 3) and empty it. 8. Remove the filter (if installed) from the water tank and press "Next". 9. Reposition the tank (empty) and press "Yes"; 10. When ready, press “Yes” to confirm. 11.
Coffee drinks Rivelia Your machine can be used to make a great variety of drinks: scroll through the options on the display until you see the one you want (fig. 15): Espresso Coffee Americano Americano Long 2x Espresso Espresso Coffee Cold ✓...
1. Press the customization bar at the bottom of the image correspond- ing to the desired drink (e.g. espresso, fig. 19). The parameters that can be customized according to preference appear on the display: Espresso Espresso Coffee Americano lungo Steam Coffee Quantity Intensity...
Page 21
2. Select “Pre-ground” 3. Choose the quantity and press “Deliver”. 4. Lift the lid of the accessories compartment (fig. 20). 5. Check that the pre-ground coffee funnel is not blocked, and add one level measure of pre-ground coffee (fig. 21) . Press "OK" to proceed with delivery.
Extra shot Rivelia Give a boost to the following drinks by adding an extra shot of espresso: ✓ Espresso ✓ Espresso lungo ✓ Long ✓ Coffee ✓ Americano Proceed as follows: 1. Press the customization bar at the bottom of the image correspond- ing to the desired drink (e.g.
Indications for making coffee-based drinks Rivelia • At the end of delivery, to increase the quantity of coffee in the cup, simply press " Extra". When the required quantity has been reached, press “ Stop” or “Cancel”. • Sundry alarm messages could be displayed while using the machine (“Fill tank with fresh water up to the MAX level”, etc.) their meaning...
Bean adapt technology Rivelia A coffee expert at your fingertips to help you optimise coffee brewing and the result in your cup in just a few steps. Smart technology guides you through adjustment and operation of the machine, according to the selected coffee beans: from grinding to brew- ing, each step will be controlled to get the best from any coffee bean.
Coffee Routine Rivelia With the Coffee Routine function, Rivelia can remember how you like your coffee during the day and update your drinks list. 1. On the homepage, press the symbol corresponding to the current coffee routine (fig. 25). 2. Activate the coffee routine (fig. 26) and press “Yes” to confirm.
Steam button: for frothing milk Rivelia Which milk to use? The quality of the froth will vary depending on: • the temperature of the milk or vegetable drink used (for best re- sults, always use milk or vegetable drink straight from the fridge, 5 °C);...
4. Push the black ring on the steam wand down into the “FOAM” position (fig. 31); 5. Position the container with FOAM the milk or vegetable drink under the steam wand (fig. 32); 6. Press “Start” 7. After a few seconds, steam will come from the wand. The milk heats up and swells in volume;...
Steam button: Hot water Rivelia 1. Press “Steam” (fig. 29); Directly selected drink 2. Select “Hot Water” (fig. 306); 3. Place a cup under the steam wand/hot water spout (fig. 35) and press “Ok”: delivery starts and stops automatically. Customized drink 2.
“My” function Rivelia With the “my” function, you can select the quantity of each single ingredi- ent used for preparation of the hot coffee drink you want to make. 1. Check that the profile selected is the profile for which you want to customize the drink;...
WATCH THE VIDEO HERE Rivelia Switch the beans container to enjoy a different blend of coffee beans Proceed as follows: 1. Twist the beans container to the unlocked position (fig. 37) and leave it there until the end of the procedure;...
WATCH THE VIDEO HERE Cleaning the machine Rivelia ➡ ➡ ➡ INTERNAL CIRCUIT OF THE BEANS CONTAINER COFFEE GROUNDS MACHINE CONTAINER ➡ ➡ ➡ DRIP TRAY AND DRIP TRAY INSIDE OF THE MACHINE WATER TANK GRILLE ➡ ➡ ➡ REMOVABLE INFUSER...
Which items are dishwasher-safe Grounds container Drip tray grille Drip tray Cappuccino maker nozzle Cappuccino maker Internal circuit of the machine If the machine has not been used for more than 3-4 days, it is strongly recommend that before any further use, it should be switched on and rinsed 2 or 3 times, selecting the relative function “Rinsing”.
4. Remove the lid from the beans container. Empty out the container, transferring any remaining beans to another recipient; 5. Wipe the inside and the outside of the container clean with a soft moist cloth, removing all residual traces of coffee. 6.
The drip tray must be emptied and cleaned before the indicator starts to project from the cup tray , otherwise the water may spill over the rim and damage the machine, the surface on which the machine is placed, or the surrounding area.
Coffee spouts 1. Clean the coffee spout regularly with a sponge or a cloth; 2. Check that the holes in the coffee spout are not blocked. If necessary, remove coffee deposits with a toothpick. Pre-ground coffee funnel Clean the removable pre-ground coffee funnel regularly (about once a month).
Please note: If the infuser is difficult to insert, adapt it to the right size (before inser- tion) by applying pressure to the two levers (fig. 45). 9. Once inserted, make sure the two coloured buttons have snapped ✔ out; 10.
WATCH THE VIDEO HERE Descaling Rivelia Important! • Before use, read the instructions and the labelling on the descaler pack. • Use only descaler supplied by De’Longhi. Using unsuitable descal- er and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee.
Page 38
Important! Danger of scalding Hot water containing acid flows out of the spouts. Accordingly, take care to avoid contact with this solution. 9. The descale programme starts and the descaler liquid comes out of the hot water spout and the coffee spout; a succession of rinses is performed automatically at set intervals to remove all the scale residues inside the coffee machine;...
Page 39
Please note: • If the descaling cycle is not completed correctly (e.g. electrical power failure) it is advisable to repeat the procedure; • It is normal for the grounds container to contain water following a rinse cycle. • If the water tank has not been refilled to the MAX level, the ma- chine prompts for a third rinse to ensure that the descaler solution has been completely eliminated from the internal circuits.
Rivelia To ensure the performance of the machine remains constant over time, the use of a De’Longhi water softener filter is recommended. For further information, visit www.delonghi.com. EAN: 8004399327252 To ensure correct use of the filter, proceed as follows: Installing the filter 1.
Page 41
1. Press on the homepage; 2. Scroll through the pages until the item "Water filter” is displayed: press “Read more”;; 3. Press "Yes" to start the guided procedure; 4. Remove the water tank and the spent filter: press "Ok". 5. To remove the filter, press "Ok" ("Back" to go back to the previous screen;...
Frequent and alarm messages Rivelia Can you fit the water tank? Insufficient water in the tank Remove the tank (fig. 3), fill the tank with fresh drinking water up to the MAX level (fig. 4), and return it to the machine...
Page 43
Sorry, not able to complete The grinding is too fine, so that the Select a milder “Intensity” (see “Cus- the drink. coffee is delivered too slowly or not tomized drink”) Reduce the intensity and try at all. again If a water softener filter is installed, Press "Ok"...
Page 44
Something is not right: have a The inside of the machine is very Clean the inside of the machine look at the instruction manual dirty. thoroughly, as described in section to improve things “Cleaning the machine””. If the mes- sage is still displayed after cleaning, contact De’Longhi Customer Ser- vices and/or an approved Service Centre...
Rivelia • The water tank is difficult to remove Tilt the tank away from the machine: once released, it will detach easily. • Steam comes out of the top after delivering coffee This is water vapour that escapes from the dose of coffee utilized and is released automatically by way of the grounds container.
Page 46
• Fitting the beans container is difficult Make sure the socket that holds the beans container is clean and free of loose beans: use the brush to remove any residual traces of coffee. Locate the beans container in the socket, being sure to align the unlock position with the notch on the machine Twist the beans container clockwise to the point at which the lock...
Page 47
• Coffee not hot (1) It has been 2-3 minutes since the last preparation and the internal circuit of the machine has cooled down: in this situation, a hot rinse is advisable. On the homepage, press to enter the settings menu: Espresso Espresso Coffee...
Page 48
• Coffee not hot (2) The temperature set for preparation of the coffee is too low. Select a higher temperature as indicated below: on the homepage, press to enter the settings menu: Espresso Espresso Coffee Americano lungo Scroll through the pages until the item “Coffee temperature” is displayed and press “Set”...
Page 49
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
Need help?
Do you have a question about the RIVELIA and is the answer not in the manual?
Questions and answers
Как снять варочный блок для чистки
To remove the brewing unit for cleaning on the DeLonghi Rivelia:
1. Ensure the machine is completely turned off and unplugged.
2. Pull out the water tank and remove the lid.
3. Squeeze the red levers of the brewing unit inward while pulling it out.
4. Rinse off any coffee pulp gently.
5. Submerge the unit in water for 5 minutes (do not use any cleaning solution).
6. Take it out, wipe it dry with a paper towel, and avoid touching the metal filter.
7. Clean the cavity before reinserting the unit.
8. Reinsert the unit until it snaps into place.
9. Clean and reattach the lid, then put the water tank back.
The brewing unit should be cleaned every month.
This answer is automatically generated
I have muddled up my coffee settings sometimes it can’t complete as it’s too strong where can I find the factory settings? It a rivella
I wish to get a printed book Copy of the Manual
Is there any way of turning on illumination on the ON/OFF switch?