Program File (Dp-M6650 Only) - Kenwood DP-M6650 Instruction Manual

Program file (DP-M6650 only)
This function allows to store the program created with
tracks on the discs present in each magazine as an
exclusive program for each magazine. (Up to 8 program
files for 8 magazines can be stored.)
When a magazine which has the program file stored for
it is inserted, that program can be recalled and played.
■ To create a program file
r
1
Program desired tracks.
(Refer to page 16.)
2 Store the program in a program file.
MFMfTOV SINGLE r~PCM 1
MEMORY time
(I—n—i]
n • n n
Tmn u• U IJ
rH
96789 10
— Blinks.
• When another program file is to be created, insert another
magazine and repeat steps 1 and 2 for it.
Playing a program file
^ Insert the magazine to be played.
2 Make sure that the
lighted.
P-MQOE
indicator is not
n
. n
n
u
• /_/
IJ
9 6 7 B 8 lO
' IPGlVtl indicator
goes off.
» When the display becomes "0:00", go to the next step.
3 Press the PGM MEMORY key.
n
.
n n
u
•
u u
5 6 7 8 9 lO
Press in
stop mode.
In about 20 seconds, "MEMORY" stops blinking and
changes to steady lighting.
• The program file is recalled.
4 Start playback.
PLAY/PAUSE
22
DP-M6650/DP-M5550 {En)
To erase program files
• It is not necessary to insert any magazine.