Dimensions; Specifications - Yamaha AM802 Operation Manual

SPECIFICATIONS
Frequency Response
+1, -2 dB, 20 Hz — 20 kHz, 10 kohms, 0 dB (ST
OUT)
+1, -2 dB, 20 Hz — 20 kHz, 10 kohms, -10 dB'
(AUX SND 1 — 3), (REC OUT)
Total Harmonic Distortion
Less than 0.05%, 20 Hz — 20 kHz, 10 kohms,
+10 dB
Hum & Noise* (20 Hz — 20 kHz, Rs = 150
ohms, CHI — 6 Gain max.)
-122dB(CH1 — 6) equivalent input noise.
-90 dB (ST OUT) residual output noise.
-76 dB (76 dB S/N) at ST OUT, Master fader
nominal, all channel faders minimum.
-72 dB (72dB S/N) at ST OUT, Master fader
nominal, channel 1 — 6 faders nominal.
-88 dB (78 dB S/N) at AUX SND, all channel
AUX controls minimum.
-82 dB (72 dB S/N) at channel 1 — 6 faders
nominal, AUX controls nominal.
Maximum Output Level
+17.5 dB, 20 Hz — 20 kHz, 10 kohms, THD
0
.
2
%
Maximum Voltage Gain
62 dB CH1 — 6 IN tO ST OUT
22 dB CH7, 8 IN to ST OUT
58 dB CHI — 6 IN to AUX SND
18 dB CH7, 8 IN to AUX SND
32 dB AUX RTN to ST OUT
Crosstalk
-60 dB at 1 kHz, adjacent channel inputs.
-60 dB at 1 kHz, input to output.
Input Channel Equalization (CH1 — 8)
15 dB maximum boost or cut
HI: 10 kHz (shelving)
LO: 100 Hz (shelving)
Level Meters
ST OUT L, R (0 = 0 dB)
Clip Indicators (CHI — 6 input)
CLIP (red) lights when pre-fader signal is 3 dB
below clipping.
Power Requirement
Power requirements match local AC mains volt¬
age and frequency in area where sold.
Power Consumption
U.S. & Canadian Models: 12 watts
General Model: 15 watts
Dimensions (W x H x D)
354
X
98.5
X
301 mm
(13-15/16"
X
3-7/8"
X
11-7/8")
Weight
2.7 kg (5 lbs. 15 oz)
* Measured with a -6 dB/octave LPF
(g>
12.7 kHz.
• 0 dB = 0.775 Vrms