Huawei 31500HKL-Box310 Quick Installation Manual

Quick Installation Guide
1
Parts List
SIP NO.
081599990 ！
Endpoint
Network cable (3 m) Touch network cable (10 m)
COM port cable Screws (4) and mounting ears (2)
Note: The Box 610-S packing list does not contain the Touch. Please prepare it in advance.
This list is for reference only. The appearances of the components may differ from those included upon
delivery. The cables and Touch delivered with a Box endpoint may be used only with that Box endpoint.
If a component is damaged, missing, or wet upon being removed from the box, contact your local
supplier.
Copyright © Huawei Technologies Co., Ltd. All rights reserved.
Touch HDMI cable (3 m x 2)
Power cable
Quick Installation Guide
2
Installing the Box
The voltage inside the Box is high. Do not disassemble it without the guidance of a professional engineer.
Installation on a Flat Surface
Place the Box on a table or other flat surface and connect the cables.
Do not stack objects above or under the Box or block the heat dissipation holes on the left or right.
Installation Inside a Cabinet
The cabinet in which the Box will be placed must be a 19-inch cabinet compliant with IEC 60297,
such as the HUAWEI N68E-22 cabinet.
Reserve at least 1 U (44.45 mm) above and under the Box and 50 mm on its left and right for heat dissipation.
1
Use a Phillips screwdriver to attach the mounting ears to the sides of the Box.
The Phillips screwdriver is not delivered with the Box. Prepare it by yourself.
2
Slide the Box into the cabinet and insert screws through the mounting ears to hold the Box
in place.
Do not install guide rails for the cabinet. The screws are not delivered with the Box. Prepare them by yourself.