Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yamaha YHT-22
Summary of Contents for Yamaha YHT-22
- Page 1 YHT-22 RAFT QUICK-CONNECT GUIDE...
-
Page 2: Tools And Parts
In addition to enhancing the sound of a video source, like your TV, DVD player, or VCR, the YHT-22 also superbly reproduces audio sources, such as a CD player or a cassette deck. -
Page 3: Audio Components
YHT-22 Q Yamaha HTR-5140 Receiver (Rear Panel) NOTE: For your convenience, the Yamaha HTR-5140 receiver is equipped with two switched ac outlets (100 W max.). If desired, use them to power on connected components (e.g., CD player or turntable) each time the receiver is turned on. - Page 4 YHT-22 S ONNECTING NS-A327 (Front Right) Clear/ Clear Stripe Wire Wire Initial STANDBY/ON HIGH CUT VOLUME Settings (on Front Panel) 50 Hz 150 Hz Clear/ Clear Stripe Wire Wire Speaker Wiring NS-A327 (Surround Right) YHT-22 Q PEAKERS NS-AC327 (Center Channel)
-
Page 5: Satellite Receiver
Yamaha HTR-5140 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5140 receiver. Use RCA Video Cables And Jacks For Video Interconnections... - Page 6 LFE channel feeds both LEFT and RIGHT MAIN output terminals. For details, refer to the owner's manual for your 5.1-Channel Decoder unit. Yamaha HTR-5140 Receiver (Rear Panel) Video Out Audio L Out Use an RCA Video Cable And Jacks For Video Interconnections...
- Page 7 Video Out *Analog Audio Out connections are required for playback of CD-Rs and recording from DVD to VCR. YHT-22 Q Yamaha HTR-5140 Receiver (Rear Panel) Digital Audio Out (coaxial) Digital Audio Out (optical) U I C K O N N E CT...
- Page 8 IDEO OMPONENTS Yamaha HTR-5140 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5140 receiver. Satellite Receiver Audio Audio L Out...
- Page 9 ABLE ASIC NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5140 receiver. ANT In Basic Cable (From Wall Jack) Descrambler Premium Cable...
- Page 10 HTR-5140 receiver and most Yamaha audio components. To program other brands of components (i.e., TV, VCR, etc.) or if your Yamaha unit does not respond, you will need to program the remote control with the manufacturer’s codes (listed on pages 113 through 117 of the HTR-5140 Owner’s Manual).
- Page 11 5. To verify the code works, aim the RAV200 at the VCR, press VCR, and then press POWER. The VCR should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. YHT-22 Q EMOTE ONTROL ONTINUED ETTING 1.
-
Page 12: Playing A Dvd
(on the back of the receiver) and its power switch was already engaged, the unit will come on each time the receiver is powered on. ©1999 YAMAHA ELECTRONICS CORPORATION, USA 6660 Orangethorpe Avenue, Buena Park, CA 90620 YHT-22 Q...