C) Meter For Direct Connection At 100 A - EMH metering LZQJ-XC Instructions For Use Manual

Terminal block, view from below (left), view from above
1 - Optical fibre coupling
2 - Button for manipulation detection
When the devices are tested, the voltage
circuits are disconnected by a path
separator.
Remove the path separator again
when resuming normal operation!

c) Meter for direct connection at 100 A

DANGER
Improper installation endangers life and health, and can lead to
malfunctions and material damage!
y Use an overcurrent protection device rated for a maximum of 100 A
as per the applicable Technical Connection Rules for Power Instal-
lations (e.g. selective main line circuit breaker) upstream of a meter
with direct connection.
y The connecting paths must be fuse-protected as per the applicable
technical regulations and in accordance with the current specifica-
tion on the meter's name plate.
17