Do you have a question about the III+ and is the answer not in the manual?
Questions and answers
Michael J HENDERSON
February 19, 2025
when loading a tube the machine sometimes sounds like it laboring (low growling sound), also, when using a 100 mm tube, the machine doesn't hold the tube until it is completely full (highest density) Leaves a space near the filter.
KristiJoy Provanchie
February 25, 2025
Just recieved the Powermatic V ... nothing happens when I push the start button
1 comments:
Mr. Anderson
February 25, 2025
Check if the Powermatic III+ is properly plugged into a power source. Ensure the power switch is turned on. Verify that the machine is not jammed and clean any tobacco residue. If the issue persists, refer to the user manual for troubleshooting.
This answer is automatically generated
Glenda. Raley
March 28, 2025
My machine dosent fill whole cigarette
1 comments:
Mr. Anderson
March 28, 2025
The Powermatic III+ may not fill the whole cigarette if the tobacco is too moist. To ensure proper filling, use volume tobacco with a moisture level below 12% relative humidity (Rh).
This answer is automatically generated
Earl Crouse
April 3, 2025
The rubber gasket that holds the empty tube in place is broken. How can I get a replacement?
Rachel
April 8, 2025
what kind of motor is used in a powermatic 3 rolling machine?
Need help?
Do you have a question about the III+ and is the answer not in the manual?
Questions and answers
when loading a tube the machine sometimes sounds like it laboring (low growling sound), also, when using a 100 mm tube, the machine doesn't hold the tube until it is completely full (highest density) Leaves a space near the filter.
Just recieved the Powermatic V ... nothing happens when I push the start button
Check if the Powermatic III+ is properly plugged into a power source. Ensure the power switch is turned on. Verify that the machine is not jammed and clean any tobacco residue. If the issue persists, refer to the user manual for troubleshooting.
This answer is automatically generated
My machine dosent fill whole cigarette
The Powermatic III+ may not fill the whole cigarette if the tobacco is too moist. To ensure proper filling, use volume tobacco with a moisture level below 12% relative humidity (Rh).
This answer is automatically generated
The rubber gasket that holds the empty tube in place is broken. How can I get a replacement?
what kind of motor is used in a powermatic 3 rolling machine?