Mechanical and Dismantling Instructions
Dismantling Instruction
: Dismantle Main Board, first disconnect 2 connectors (XP1, XP11), and then remove 5 screws. (Figure 5/6)
Step6
: Dismantle Power Board, disconnect the connector s XP502 and CN502 on Power Board,then remove 5 screws.(Figure 5/6)
Step7
Step8: Dismantle Amplifier Board, remove
4 screws
XS604
XP3
XP11
XP1
XP2 XP6 XP12
Figure 6
3-3
Detailed information please refer to the model set.
(Figure 5/6)
XS703
XP502
CN502