Philips HTB7150 Service Manual page 12

e) Select <Start>, press <OK> button on R/C.
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000022.0
Software BE 80%
Software FE Completed
Software MCU1:
Software Dock:
Software MCU3:
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000022.0
Software BE Completed
Software FE Completed
Software MCU1: Not started
Software Dock: 2%
Software MCU3: Not started
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000022.0
Software BE Completed
Software FE Completed
Software MCU1: 1%
Software Dock: Failed
Software MCU3:
f) The set will shut down automatically when the software upgrade
is completed.
2 - 2
6) OSD Language setup (only for 51 version)
a) Press " " <Home> button on R/C.
b) Select <Setup>, then press "OK" button on R/C.
c) Select <preference>, then press <OK> button on R/C.
d) Select <Menu language>, then press <OK> button on R/C.
e) Select <English>, then press <OK> button on R/C.
7) Update the onscreen help
If the current version of the onscreen help is lower than the latest
version available on www.philips.com/support, download and install
the latest onscreen help.
* A USB fl ash drive that is FAT or NTFS formatted, with at least
35MB of memory. Do not use a USB hard drive.
* A computer with internet access.
* An archive utility that supports the ZIP fi le format
a) Connect a USB fl ash drive to your computer.
b) In your web browser, go to www.philips.com/support.
c) At the philips support website, fi nd your product and click on User
manuals, and then locate the User Manual Upgrade Software. (The
help update is available as a zip fi le).
d) Save the zip fi le in the root directory of your USB fl ash drive.
e) Use the archive utility to extract the help update fi le in the root
directory. (A fi le named "HTSXXXXeDFU.zip" is extracted under the
UPG folder of your USB fl ash drive, "xxxx" being the model number
of your home theater.)
f) Disconnect the USB fl ash drive from your computer.
Caution: Do not switch off the home theater or remove the USB
fl ash dirve during the update.
g) Connect the USB fl ash drive containing the downloaded fi le to
your home theater. (Make sure that no disc is loaded inside the disc
compartment)
h) Press " " <Home> button on R/C.
i) Enter 338 on the remote control.
j) Follow the onscreen instructions to confi rm the update.
k) Disconnect the USB fl ash drive from the home theater.
2 - 2
8) Produce to change Tuner gird (only for /98 version)
In some countries, you can switch the FM tunning grid between 50
kHz and 100 kHz. Changing the tuning grid erases all preset radio
stations.
a) Press <radio> button on R/C.
b) Press <Stop> button on R/C.
c) Press and hold <Play/Pause> until grid 9 (50 kHz) or grid (100
kHz) is displayed.
Note: Repeating the same action will toggle back to it previous
tuning grid setting.
CAUTION!
This information is confi dential and may not
be distributed.