■ Monitoring and Controlling per block
■ Monitoring and Controlling per area
48
1.
Set the following configuration in the
monitoring window.
● Display target: All
● Displayed per: Block
● Display format: Panel
● Panel size: 1
Refer to the operation manual for details
of the setting procedure.
2.
Control an air conditioner from remote
control and check if the indication on
Central Station EX and the operating air
conditioner match.
3.
Select an air conditioner on Central
Station EX and check if the indication on
Central Station EX and the operating air
conditioner match.
●
Conduct steps 2 and 3 on each block
one by one to prevent any misreads and
mistakes.
1.
Set the following configuration in the
monitoring window.
● Display target: All
● Displayed per: Area
● Display format: Panel
● Panel size: 1
Refer to the operation manual for details
of the setting procedure.
2.
Control an air conditioner from remote
control and check if the indication on
Central Station EX and the operating air
conditioner match.
3.
Select an air conditioner on Central
Station EX and check if the indication on
Central Station EX and the operating air
conditioner match.
●
Conduct steps 2 and 3 on each area
one by one to prevent any misreads and
mistakes.
A12124820A