Switching the cooktop on
Touch the sensor control.
Additional sensor controls will light up.
If no further entry is made, the cook-
top will turn itself off after a few sec-
onds for safety reasons.
Switching off a cooking zone/
the cooktop
Switching off the cooktop
To switch off the cooktop and all the
cooking zones, touch the sensor
control.
Switching off a cooking zone
To switch off a cooking zone, touch
the 0 sensor control on the numerical
display for that cooking zone.
Power level
Setting the power level
Permanent pan recognition is activated
as standard (see "Customizing set-
tings"). When the cooktop is switched
on and you place an item of cookware
on one of the cooking zones, all the
sensor controls for the numerical dis-
play will light up.
Place the cookware on the cooking
zone you want to use.
Touch the sensor button on the rel-
evant numerical display.
Touch the appropriate sensor control
for the power level you want on the
relevant numerical display.
Setting the power level – extended
power level range
The extended setting range for the
power levels is activated (see "Cus-
tomizing settings").
Press the numerical display between
the sensor controls.
The numbers to the left and right of the
interim level light up brighter than the
other sensor controls.
Example:
If you have set power level 7., the num-
bers 7 and 8 will be brighter than the
other numbers.
Changing the power level
Touch the appropriate sensor control
for the power level you want on the
numerical display.
Operation
41