Owlet Dream Sock User Manual page 61

9.4 Turning the Sensor Off and On
Owlet recommends placing the Sensor on the Base Station when not in use to charge the Sensor and to keep it safe. The Sensor
should only be turned off for cleaning and short-term or long-term storage.
Turning the Sensor Off
1. In the Owlet Dream App, press the settings cog
Owlet Device.
2. Press "Turn off Sensor".
The red light in the Sensor will turn off and monitoring will cease.
Turning the Sensor On
The Sensor is turned on when it is removed from the charger. To turn the Sensor on, place it on the Base Station charging port for at
least 3 seconds and then remove it.
9.5 Unpairing your Sensor
To unpair your Sensor, follow the steps below:
1. Unplug the Base Station and remove the Sensor.
2. Press and hold the Base Station button while you plug the Base Station back in. Keep pressing the button until you hear the
Base Station chirp 4 times. The light ring will change to blinking orange. Release pressure after you hear a chirp.
3. Quickly press the Base Station button twice (2x). Ensure the Base Station light ring is blinking orange, otherwise, the Sensor
will not properly turn off.
If successful, the light on the bottom of the Base Station will not be illuminated, and the Sensor will NOT turn off. The Base Station
will bounce white briefly before the blue disconnection notification sounds.
on the Home Screen or navigate to the Account tab then select the
61