Related Manuals for Owlet Cam 2
Summary of Contents for Owlet Cam 2
- Page 1 Owlet Cam 2 User Guide Cam Set Up Getting online | Getting Installed How to View and use your Cam 2 Cam Notifications & Video Clips Cam Settings | Information Appendix...
- Page 2 Getting your Owlet Cam 2 Set Up This part of the user guide will help you get your Cam 2 OC 20 set up, online and installed. If you see this error, take a look at the behavior of the...
- Page 3 Place the Cam 2 and all cables 36 inches (92 cm) away from the edge of the crib. Cables within 36 inches (92 cm) of the edge of the crib should be covered.
- Page 4 What’s in the Box Wall Mounting Kit Tools Needed to Mount the Cam 2 Owlet Cam 2 Measuring tape (not included) Mounting Cables with Owlet wraps plate 21x cable guards and room temperature and humidity sensor 18x long guards Small Phillips screwdriver...
- Page 5 Measure 36 inches (92 cm) from the top of your baby’s mattress and make a mark on the wall — this is where the Cam 2 will be mounted. Center this mark above baby’s crib for the optimal viewing angle.
- Page 6 2 Align and fasten 3 Unwind the cable 4 Thread the cable sticker Align the center hole of the mounting Remove the cable wraps and Thread the cable down the channel plate with the mark you’ve made on unwind the cable. of the mounting plate, aligning the the wall.
-
Page 7: Mount The Base
The orange sticker should be Attach the Cam 2 to the magnetic magnetic base over the protruding base. Plug the cable into the Cam 2. placed just above the mounting tabs on the mounting plate, then slide plate so that you have enough downward until it clicks. - Page 8 7 Mount cable guards The cable guards use high-strength long guard adhesive. Take your time during installation to ensure proper placement. 1 Peel off adhesive cover from the back of a long guard 2 Thread cable down the center of a long guard 3 Snap long guard onto the bottom of the mounting plate 4 Press firmly onto wall...
- Page 9 8 Mount L-bracket L-brackets Use the right or left L-bracket to guide the cable in the direction of the wall outlet. Install long guards until any cable within 36 inches (92 cm) of the edge of the crib is covered. Continue adding long guards as needed to reach the outlet.
- Page 10 Once the excess cable has been wrapped securely, connect the power cable to the power adapter and plug it in. You’re all set! You can now use the App to reference how to adjust the Cam 2 angle until you achieve the desired view.
- Page 11 How to Use your Owlet Cam 2 in the App This portion of the user guide will help you understand how to use the Cam 2 and all it’s features within the App. Cam 2 Home Screen 2-Way Talk You can view your Cam 2 stream Use this feature to speak to your on iOS or Android devices.
- Page 12 App, you will not hear factors. Cam 2 is set up to run on The status will be updated to reflect sounds from their room. “Auto,” which will automatically...
- Page 13 Default are set to 60˚F (16˚C) frame. and 80˚F (28˚C) • Room Comfort /Sleep Assist: The Cam 2 reads the temperature in Celsius, and is converted to Fahrenheit, so the readings get notified when the room could be off by an average of 1-3 degrees...
- Page 14 Baby’s room. Clips will be saved in the notifications. A mobile device will only Cam 2 Notifications enabled to ON on Owlet App for 7 days, and can be saved receive specified notifications once the home page. to your mobile device. The video clips during the time period set.
- Page 15 History Video Clip Management • Availability: Video clips are Video clips can also be found under available for users to view for the History tab, and will be included 7 days after the clip is captured. with any other history associated with that day.
- Page 16 Repairing the Cam will reset the Owlet Cam 2 is Offline Wi-Fi connection to the Cam. This message indicates that the Owlet Cam 2 does not Go to Account tab, MyOwletDevices have a connection to the internet. You can verify this or...
- Page 17 Cam 2 feed. You can also navigate your account and other Cam 2 settings and general information in the Account tab. From the Account tab, and select your Cam 2 from the list of Owlet Devices where you can: • Change your Cam 2 name, or change which child’s profile the Cam 2 is assigned to.
- Page 18 Appendix...
- Page 20 WiFi router. Hereby, Owlet Baby Care declares that the Owlet Cam 2 is • WARNING: The Owlet Cam 2 is not a medical device. It is in compliance with Directive 2014/53/EU. The full text of the not intended for use as a medical device or to replace a...
Need help?
Do you have a question about the Cam 2 and is the answer not in the manual?
Questions and answers