Dolby 3 Stereo Mode - Kenwood KR-896 Instruction Manual

Dolby 3 STEREO mode (KR-896/KR-796 only)
The Dolby 3 STEREO provides a active center channel to
produce a better, stable center image. This mode can be
used when listening to stereo video program and music
or when surround listening or surround system set-up is
ers ears
not possible.
TEST TONE key
mg Dolby 3 STEREO adjustment
1 Set the Dolby 3 STEREO mode.
DOLBY 3 STEREO —————
Lights up
Select the center mode.
centen Click on the ;
mope CENTER MODE
key with a pointed
object such asa _
ballpoint pen.
Every time the key is pressed,
the center mode is switched.
NORMAL «—» WIDE BAND
e Set the center mode to NORMAL if using a small
center speaker, or set to WIDE BAND if using a
medium-sized or larger speaker.
Adjust the center speaker volume.
(1) Press the TEST TONE key.
TEST TONE A buzzing sound CENTER
comes from the
speaker. It is
switched every
one and half sec-
ond for each oth-
er,
Remote control unit only
e Press at the listening position.
« When at 3 Stereo, sound is produced in sequence:
LEFT -» CENTER -> RIGHT (REAR is not available with
3 stereo mode.)
(2) Adjust the volume.
- CENTER LEVEL
a a * Adjust so that the level of the
center speaker is equal to that of
the left and right speakers.
e The rear level adjustment is
invalid.
4 Stop generating the test tone. test tone
Press the key again.
BYPASS key DOLBY 3 STEREO key
CENTER MODE key
m Dolby 3 STEREO playback
CENTER LEVEL key
| 1 set the Dolby 3 STEREO mode. _
DOLBY 3 STEREO
Thy —
Lights up
| 2 Select the center mode.
Click on the
CENTER MODE
key with a
pointed object
such as a
ballpoint pen.
Every time the key is pressed,
the center mode ts switched.
NORMAL «—» WIDE BAND
« Set the center mode to NORMAL if using a small
center speaker, or set to WIDE BAND if using a
medium-sized or larger speaker.
| 3 Play a stereo software ora money
surround program.
, 4 Adjust the volume and tone.
VOLUME CONTROL
OWN =a] UP
"
To return to normal stereo playback
BYPASS
KR-896/KR-796/KR-596 (En) 17