Technical Data - DeWalt DCMHT573X1 Original Instructions Manual

HEDGE TRIMMER
DCMHT573
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Blade strokes (no load)
Blade length
Blade gap
Blade strokes per minute
Blade break time
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
K (uncertainty for the given sound level)
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Hedge Trimmer
DCMHT573 DCMHT573
V 54 D
e
DC
Technical Data are in compliance with: 2006/42/EC, EN 62841-
1
1:2015+A11:2022, EN 62841-4-2:2019+A1:2022+A11:2022,
Li‑Ion
2000/14/EC, Annex V.
min 1700
‑1
L
WA
mm 650
Uncertainty (K)= 3.3 dB (A)
mm 31
L
WA
These products also comply with Directive 2014/30/EU and
3400
2011/65/EU. For more information, please contact D
s <1
the following address or refer to the back of the manual.
kg 4.1
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
dB(A) 82
dB(A) 3.0
dB(A) 92
Markus Rompel
dB(A) 3.3
Vice-President Engineering, PTE-Europe
D
e
m/s 2 3.8
65510, Idstein, Germany
m/s 2 1.5
17.07.2023
D
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841-1:2015+A11:2022;
EN62841-4-2:2019+A1:2022+A11:2022.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended). Schedule 8.
L
WA
Uncertainty (K)= 3.3 dB (A)
L
WA
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
WALT declares that these products described under
(measured sound power level) 92 dB(A)
(guaranteed sound power) 96 dB(A)
WALT, Richard-Klinger-Straße 11,
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Hedge Trimmer
DCMHT573
WALT declares that these products described under
(measured sound power level) 92 dB(A)
(guaranteed sound power) 96 dB(A)
English
WALT at
e
WALT.
e
3