Child Lock; Frost Protection; Open Window Detection - Hyco Accona Product Instruction Manual

Selecting Between Full and Half Power
• Press the
displayed by either the LO or HI icon on the display (see section 3. Controls).

Child Lock

• Press the
temperature display will be replaced by [ ] icon to indicate the appliance is locked.
• Repeat the first step to unlock.
• If you are unsure whether child lock is active when the appliance is in standby, press
the button to illuminate the LCD display. Press any button to check whether the
child lock [ ] icon is displayed.

Frost Protection

• The appliance has a frost protection mode which will not allow the temperature of its
surroundings to drop below 5°C. This feature will operate regardless of any settings
that have been selected. The only way to prevent this feature operating is to switch
off the heater at the main switch (not standby).

Open Window Detection

• Open window detection will detect any sharp drop in the room temperature due to
an open window. This is designed to help reduce energy wastage, it is recommended
to be set on.
• The appliance will beep and stop heating, WO will flash to indicate open window
detection. To clear, the appliance should be switched off and back on using the
button.
• It is possible to switch the feature on or off. Press and hold OK until the appliance
beeps and the WO icon is no longer visible. This means open window detections has
been switched off.
button to choose between the settings. The current setting will be
arrows simultaneously and hold until the appliance beeps. The
13