Table of Contents
Advertisement
Connections to other equipments
The exact arrangement you use to interconnect
various video and audio components
to the TV/DVD is depend-
ent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an AV Amplifier
with built-in
digital
surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect
an AV amplifier
with built-in
Dolby Digital decoder,
DTS decoder, MPEG decoder or etc as
shown below.
Rear of TV/DVD
I
Coaxial Digital
Audio Output
OaXial d igital cable (not supplied)
Coaxial Digital Audio Input
AVAmplifier with built-in digital surround I I
decoder as listed above
(Left)
,v.
TV/DVD
Subwoofer
Center Speaker
Front
Speaker
(Right)
_
Surround
Speaker (Left)
_
Surround
Speaker
(Right)
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTE:
• When you make the connections
above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on theAV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be
damaged.
• When playing DTS-encoded
CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
42
Advertisement
Table of Contents
