Table of Contents
Advertisement
TV operation
1
2
To turn on the TV/DVD, press
POWER.
Adjust the volume level by
pressing VOL + or -. The volume
level will be indicated on the
screen by green bars. As the
volume level increases, so do
the number of bars. tf the volume
decreases, the number of green
bars also decreases.
Set the TV/CATV menu
option to the appropriate
position. (See page 17.)
VOLUME
32
TV
- VHF/UHF channels
CATV - CABLE TV channels
MUTING
The MUTING button instantly turns the volume down com-
pletely when you press it.
Press MUTING button and the volume level will instantly go to
zero. To restore the volume to its previous level, press MUTING
button again.
NOTES:
• If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
• If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
14
Press the Direct Channel selection
buttons to select the channel.
CH012
TV Mode Direct Channel Selection
When the TV/CATV menu option is
in the TV position, all channels can
be instantly selected by using two
buttons. (for example, to select
channel 2, press "0", then "2". If
you press only "2", channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position, channels
can be selected as follows:
TO SELECT CATV CHANNELS:
1-9:
Press "0" twice, then 1-9 as needed. Example, to select
channel 2, press "002".
10-12:
Press "0", then the remaining 2 digits. Example, to
select channel 12, press "012".
13-99:
Press the 2 digits in order. Example, to select channel
36, press "36".
100-125:
Press the 3 digits in order. Example, to select channel
120, press "120".
NOTE FOR CHANNELS
1-12:
If only 1 or2 buttons are pressed, the corresponding
channel
will be selected in 2 seconds.
Advertisement
Table of Contents
