Sharp FLASH PATH VR-1FPN Operation Manual page 17

Using the FlashPath
[Windows NT 4.0 Operating System] Error window
"No FlashPath has been detected in any drive." appears immediately.
Under normal conditions: : ;
"The FlashPath is functioning normally." [windows 93/99 Operating system
When the remaining battery power is low:
"Battery low condition detected."
When there is no SmartMedia in the FlashPath or the
SmartMedia is inserted backwards:
"FlashPath error.
Check SmartMedia and retry"
When the FlashPath has switched to the shutdown
mode:
"FlashPath has powered off. Eject and re-insert to
activate."
When the remaining battery power is low:
"Battery low condition detected. The SmartMedia is now
read only."
When there is no SmartMedia in the FlashPath or the
SmartMedia is inserted backwards:
"The SmartMedia cannot be accessed. Please eject the
FlashPath and be sure that the SmartMedia has been
inserted properly."
When the FlashPath has switched to the shutdown
mode:
"The FlashPath has powered off to save its batteries.
Please eject the FlashPath from your floppy drive and re-
insert it to turn it back on."
14