Getting Started; Before Applying The Power; A Safety Precautions; Unpacking - Kenwood VR Series Instruction Manual

VR/KRF-V SERIES (En/KM>
Before applying the power_
Units are designed for operation as follows.
U.S.A. and Canada
Australia.
China.
•Other countries ...
.AC 120 V only
.AC 240 V only
".AC 220 V only
AC 110-120 / 220-240 V swltchable
* AC voltage selection
The AC voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before
connecting the power cord to your AC outlet, make sure that the
setting position of this switch matches your line voltage. If not. it must
be set to your voltage in accordance with the following direction.
AC voltage selector switch
Move switch lever to
match your line
voltage with a small
screwdriver or other
pointed tool.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector switch.
Safety precautions. ..
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOIS¬
TURE.
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL THIANGLE, IS INTENDED TO
ALERTTHE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCTS EN¬
CLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PER¬
SONS.
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI¬
ANGLE IS INTENDED TO ALERT THE USER TO THE PRES¬
ENCE OP IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE AC¬
COMPANYING THE APPLIANCE.
Unpacking _
Unpack the unit carefully and make sure that all accessories are put aside
so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is
damaged or fails to operate, notify your dealer immediately. If your unit
was shipped to youdirectly. notify the shipping company without delay.
Only the consignee (the person or company receiving the unit) can file a
claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials
for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Cleaning
Do not use volatile solvents such as alcohol, paint thinner, gasoline,
or benzine, etc. to clean the cabinet. Use a clean dry cloth.
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic components.
-v-s
i