Whirlpool Cabrio,- WTW5600X Use And Care Manual page 16

Top-loading high efficiency low-water washer
Hide thumbs Also See for Cabrio,- WTW5600X:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/help
If you experience
Washer not performing as expected (cont.)
Fabric Damage
Button sounds are turned off.
No sound when
buttons are pressed
Odors
Estimated Time
Remaining is
not correct
16
for assistance and to possibly avoid a service call.
Possible Causes
Sharp items were in pockets during
wash cycle.
Strings and straps could have tangled.
Items may have been damaged before
washing.
Fabric damage can occur if washer is
overloaded.
Liquid chlorine bleach may have been
added incorrectly.
Garment care instructions may not
have been followed.
Monthly maintenance not done as
recommended.
Using wrong or too much detergent.
Excess suds caused by not
using HE detergent or using too
much detergent.
Using Presoak and Deep Clean/Clean
Boost in the same cycle?
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Load garments in loose heaps evenly around the basket wall.
Do not load above the stainless steel portion of the basket.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Always read and follow garment manufacturer's care
label instructions.
Button sounds can be turned on or off by pressing and holding
Cycle Signal for 5 seconds.
Run the Clean Washer cycle with AFFRESH™ monthly.
See "Cleaning Your Washer" in Washer Maintenance.
Unload washer as soon as cycle is complete.
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer's directions.
See "Cleaning your Washer" section.
If excess suds are detected, the washer will add extra rinsing
and pauses to break down suds. This will lengthen the cycle
time. Use only HE detergent. Be sure to measure correctly.
On some cycles, when using more than one enhanced cleaning
option, the cycle time may exceed 99 minutes.
Solution

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents