Advertisement
Quick Links
Advertisement
Related Manuals for Maxi-Cosi Luna
Summary of Contents for Maxi-Cosi Luna
- Page 1 Suitable from 6 MONTHS TO 8 YEARS Luna (approximately) Forward facing car seat Instructions applicable for: Luna Luna Pro Instruction Manual IMPORTANT KEEP THIS BOOKLET IN THE PLACE PROVIDED AT THE BACK OF THE CHILD RESTRAINT Scan QR code to view...
- Page 2 Forward Facing Mode Scan QR code to view online video Quick Setup with Seatbelt instructions Harness straps in green zone The shoulder straps must be in the slots which are nearest to the child’s shoulders but not more than 25mm below the click child’s shoulders.
- Page 3 Preparation before Install Install using Seatbelt Our vision at Maxi-Cosi is to help parents as their families grow, and like an embrace that carries How to use a child before they can walk, we’ve helped millions of families at the start of their new life.
- Page 4 WARNINGS WARNINGS Read and follow all of the installation TO BE USED WITH A LAP-SASH OR LAP Do not alter or modify this restraint. IF AN AIRBAG IS FITTED IN THE SEATING instructions for maximum protection. If you ONLY SEATBELT IN THE BACK OF MOST POSITION WHERE THE CHILD RESTRAINT Repairs must only be done by the have any questions regarding the installation...
-
Page 5: Shoulder Height Markers
Shoulder Height Markers Marker B Upper When the child’s shoulders reach this upper marker, or the child no Shoulder longer fits in the child restraint, approximately 8 years of age, then the Marker B child must be moved to the next form of child restraint. Height Marker Marker A... - Page 6 Forward Facing Mode Instructions Congratulations! Your child has reached their forward facing height markers. This seat is fully harnessed until 8 years of age. Here’s a quick check list before you install this child restraint: Check that your child’s shoulders reach the minimum entry point for this seat. ...
- Page 7 Forward Facing Mode Components Adjustable Headrest Padded Insert 11. Headrest Activator Leaver (x2 if fitted) 16. Top Tether/Instruction Manual Storage Pocket Headrest Height Adjuster button Adjustable Arm Rest 12. FORWARD-FACING BELT PATH 17. Top Tether Hook Air Protect x 2 Buckle 13.
- Page 8 Forward Facing Mode Preparation before install PRESS Recline adjustment Top tether adjustment BUTTON Select the desired recline position IMPORTANT: Always secure the loose by swinging the recline arm back end of the top tether strap to prevent (Figure 1). it hanging out of the car or being PULL accessible by the child.
- Page 9 Forward Facing Mode Preparation before install Install using Seatbelt How to position your car Forward-facing belt path seat correctly IMPORTANT: Before installation, locate the forward-facing belt path. Step 1. Loosen the top tether. Step 2. Place the restraint on the back seat of the vehicle in-line with a top tether strap anchorage point.
- Page 10 Forward Facing Mode Install using Seatbelt Route seatbelt through Step 8. Firmly pushing down on the forward facing belt path seat with one hand or pressing down with your knee (if possible) At the same time pulling up on the sash part Step 5.
- Page 11 Forward Facing Mode How to use Remove slack from top tether Adjusting the harness Pull Step 1. Remove slack only. Do not To Loosen harness over-tighten the top tether strap so that the restraint lifts up off the vehicle Step 1. Lift the harness release lever seat (Figure 9).
- Page 12 Forward Facing Mode How to use Headrest and harness Chin support height adjustment Adjustment (if fitted) Step 1. Push the button located at the IMPORTANT: Always activate the top of the headrest and lift up or down chin support before you start your to the desired height (Figure 6).
- Page 13 Forward Facing Mode How to use No twists Crotch buckle height and Fastening the buckle length adjustment assembly To adjust: Step 1. To RELEASE the buckle, press Step 1. Release the valcro trim strap the red button. on the underside of the seat (Figure Step 2.
-
Page 14: Additional Information
Pinch • Care and maintenance Test • Anchorage fittings Always use the Pinch test • Your Maxi-Cosi guarantee. when you buckle your child as your harness may need adjusting. Figure 13 WARNING DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR... -
Page 15: Care And Maintenance
Care and Maintenance Caring for the Restraint Buckle Your Luna forward-facing car seat is suitable from 6 months to approximately 8 years of age. Once your child has out grown this seat, it is time for you to Follow the manufacturer’s instructions at all times. - Page 16 Feed the crotch part of the buckle through the opening slot in the insert and fasten buckle assembly. Only replace the cover with a Maxi-Cosi supplied replacement cover with identical shoulder height markers or a replacement cover meeting To remove belt mates To remove the belt mates, simply undo press studs and AS/NZS 8005.
- Page 17 Additional Information Care and Maintenance Additional Information Install Upper Anchorage For cars fitted with a child restraint For cars not fitted with a child restraint upper anchorage point upper anchorage point For sedans only Locate the upper anchorage point behind the rear seating position 200mm min.
-
Page 18: The Next Seat For Your Child
AS/ Dorel Extension Straps - 300mm & 600mm For more information, NZS 8005 and is stated as suitable for visit maxi-cosi.com.au Legs are not long this child restraint. enough so child is Sash part across... - Page 19 Notes Notes...
- Page 20 Please retain your receipt as proof of purchase or register your product with us within 3 months from point of purchase via our website www.maxi-cosi.com.au. If you are having difficulties with your product contact our Customer Service Team on ph: 1300 809 526 or alternatively, via our website at www.dorel.com.au.
- Page 21 Don’t forget to register your product within 3 months of purchase for the Lifetime Warranty offer Please visit to register now. www.maxi-cosi.com.au © 2022 Dorel Australia, Pty Ltd. All Rights Reserved. KXGA 2013 | KX-13-B 12/2022 * Terms and conditions apply.
Need help?
Do you have a question about the Luna and is the answer not in the manual?
Questions and answers