Commissioning; Allocation Of Devices And Definition Of Channels - ABB free@home BI-F-2.0.x2 Product Manual

6

Commissioning

Commissioning of the device is carried out via the web-based surface of the System Access
Point ABB-free@home
overall system have already been carried out. Knowledge about the basic functions of the
commissioning software of the System Access Point is assumed.
The System Access Point establishes the connection between the free@home Bus participants
and the smartphone, tablet or PC. The System Access Point is used to identify and program the
participants during commissioning.
Devices which are physically connected to the free@home Bus- bus, log themselves
automatically into the System Access Point. They transmit information about their type and
supported functions ("Functions" on page 9).
During initial commissioning all devices are given a universal name, e.g. "Sensor/switch
actuator 1/1gang". The installer should assign names that are practical and specific for the
system, e.g. "Living room ceiling light".
Notice
General information about commissioning and parameterization is available in
the ABB-free@home
6.1

Allocation of devices and definition of channels

The devices integrated into the system must be identified, i.e. they are allocated to a room
according to their function and are given a name.
The allocation is carried out via the web-based user interface of the System Access Point or the
ABB-free@home
Product manual 2CKA000073B5466
®
App Next. It is assumed that the basic commissioning steps of the
®
system manual.
®
App Next.
Commissioning
│20