CONNECTING
TO AN AUDIO
SYSTEM
(DOLBY
DIGITAL,
DTS AMPLIFIER)
1. If using an optical cabb (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.
If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL)terminal on the rear of the
Blu-ray Disc Player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2. Using the video signal cabb(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminals of your TV as
described on pages 20 to 25.
3. Turn on the Blu-ray Disc Player, TV, and Amplifier.
4. Press the input sebct button of the Amplifier to select the external input in order to hear sound from the Blu-ray
Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
[_
_ Please turn the volume downwhenyouturn on theAmplifier.Suddenloudsoundmaycausedamage to the
speakers andyourears.
'_ Please set the audiointhe menuscreen according to theAmplifier.(Seepages35--36)
,_ Theposition ofterminals m ayvarydepending ontheAmplifier. P haserefertothe user'smanual ofyourAmplifier.
_ Whenusingthisconnection, B lu-rayDiscswithan LPCM audiosoundtrack will onlybe heardoverthe front
twochannels.
28
COIqlneOtiOIqiS