Canon IXUS Z79 Manual page 53

Changing the Print Quantity After Taking a Shot
0—
DlUl
CZD
sa
,1
1
=
cm -p-q-
TiW*
' n vf
§
SeiKt
"?
i
=i_rm
Press the ^ button
X
and
press the Seiect button for
two seconds, or longer
• Use the push-button
projection on the strap to
push the button
•4'"P-0" (no print) blinks in the
LCD panel.
2 Press the ^ button untii
the number of prints you
want to set for the shot
appears in the LCD panei.
^The print quantity display
changes as follows: P-1,
P-2... P-9. P-0, P-1.
3
Press the Set button.
^The film is rewound one
frame and the print quantity
setting is adjusted.
• The setting is complete and
the display changes to the
date and time.
• If the camera Is turned off before either of the film
quantity setting procedures is compteled, the setting
will revert to the previous setting.
• You cannot use the print quantity setting when "." is
displayed on the LCD panel Make sure that the date
and time have been set before setting the print quantity.
• Press the ^ button once to advance the print
quantity by one, keep the button pressed to advance
the value continuously.
• Not all print shops can process the print quantity
setting when the film is developed and printed.
0-53