Samsung DW80H995 Series Installation Manual page 13

Insert the clamped drain hose into the holder hose.
Tighten the clamp in the right position.
I
Bad Good
: ..... ] --.... .
The clamp is improperly connected.
Tighten the clamp in the center of the
assembly position.
To prevent damage to the drain hose that is designed to pass
the product to the right, use the provided hose fixer and screw
to secure the middle area of the drain hose to the product.
Make sure to secure on the arrow-marked area.
If drain hose is not connect completely, an information code of "OC" appears on the display.
CAUTION
<Figure 4>
_D
Junction
Strain
installing the dishwasher 13
D1,*Tg0H9950US 00151A 06 EN 150216illdd Sec3:13