Adjusting the output terminal response level (Pr.418)
The response level of the output terminals can be delayed in a range of 5 to 50 ms. (Operation example for the RUN signal.)
RUN
Pr.418 = 9999
RUN
Pr.418 ≠ 9999
NOTE
• The response level is not adjusted while Pr.418 = "9999".
• When Pr.157 OL signal output timer is set for the Overload warning (OL) signal output, the OL signal is output after the
time period calculated by adding the Pr.418 setting to the Pr.157 setting elapsed.
34
DIGITAL OUTPUT
OFF
ON
ON
Pr.418
Pr.418
Time
OFF