Inspection & Mounting; Initial Inspection; Materials Supplied - Kustom Signals Golden Eagle II Operator's Manual

3. INSPECTION & MOUNTING
3.0.

Initial Inspection

Before installing your Golden Eagle II, please take a
moment to carefully inspect it for damage caused by
shipping. Contact the shipping carrier at once if you notice
any damage.
Remove the unit from the shipping carton and check the
packing list against your original purchase order. If the
shipment is incomplete or a parts error has been made,
please contact your district sales manager or Kustom
Signals Customer Service Department at (620) 431-2700 or
800-835-0156.
3.1.

Materials Supplied

Description
The following equipment is normally included:
Display/Processing unit
One or two microwave antennas
Windshield Antenna Mounts
Antenna Cables
Wired remote control
Installation Kit (Mounting Bail and TruTrak Cable)
35 MPH Tuning Fork (30 MPH for some Ka-Band
antennas)
65 MPH Tuning Fork (55 MPH for some Ka-Band
antennas)
Operator's Manual CD
Optional
Display/Processing unit separation kit
Heavy Duty Carrying Case
Wireless Remote Control
Auxiliary Power Receptacle Cable
Various Display/Processing Unit Mounts
Various Antenna Mounts
Section 3—Inspection & Mounting
3.1