NEC UNIVERGE SV9100 System Maintenance Manual page 96

Issue 1.0
System Alarm Report – SMTP Host Port
90-11-07
Number
When Alarm Reports are to be emailed, set
the SMTP host port number. Contact your
ISP (Internet Service Provider) for the correct
entry if needed.
System Alarm Report – To E-mail Address
90-11-08
When Alarm Reports are to be emailed, set
this email address to where the report should
be sent.
System Alarm Report – Reply Address
90-11-09
When Alarm Reports are to be emailed, set
the email address where replies should be
emailed.
System Alarm Report – From Address
90-11-10
When Alarm Reports are to be emailed, set this
email address for the station sending the report.
System Alarm Report – DNS Primary
90-11-11
Address
When Alarm Reports are to be emailed, set the
DNS primary address.
System Alarm Report – DNS Secondary
90-11-12
Address
When Alarm Reports are to be emailed, set the
DNS secondary address.
System Alarm Report – Customer Name
90-11-13
When Alarm Reports are to be emailed, enter a
name to identify the particular system.
System Alarm Report CC Mail Setup – CC
90-25-01
Mail Address
Define the mail address to receive the system
alarm report CC Mail setup.
System Alarm Display Setup – System
90-50-01
Alarm Display Telephone
Define the extension number that Alarm
Reports are displayed on.
84
0 ~ 65535
Maximum of 255 characters
Maximum of 255 characters
Maximum of 255 characters
0.0.0.0 ~ 255.255.255.255
0.0.0.0 ~ 255.255.255.255
Maximum of 255 characters.
Maximum of 255 characters
Maximum of eight digits
System Maintenance Manual
UNIVERGE SV9100
25
No Setting
No Setting
No Setting
0.0.0.0
0.0.0.0
No Setting
No Setting
No Setting