Ctcss Setting; Transmission; Tone Squelch Operation; Entering The Data Into Memory - Kenwood TM-732A Instruction Manual

1-2. CTCSS Setting
1. Press the BAND SEL key to select the desired band.
2. Press the TONE key repeatedly until the CT indicator
lights in the display. The indicator will alternate
between T (for transmit encode tone only) to CT (for
transmit and receive tone Tone Squelch.)
O's
°
Use of noise squelch is recommended when using
CTSS.
pe Dee TC Otto od
egal Cx ITT
60
1-3. Transmission
When the PTT switch is pressed, the selected tone
frequency is transmitted along with the normal voice
audio.
1-4. Tone Squelch Operation
The squelch opens only when the incoming tone
frequency matches the preset CTCSS tone.
1-5. Entering the Data into Memory
The tone frequency and tone squelch status can be
stored into memory with the normal transmit and
receive data.
() Entering data into memory
1. Press the F key.
2. Select the desired memory channel number with
the tuning control or microphone UP or DWN key
while the F indicator is on.
3. Press the MR/M key within 10 seconds.
(©) Entering data into a call channel
1. Press the F key.
2. Press the CALL key while the F indicator is on.