Automatic Power Off (Apo); Chapter7 Menu Set-Up; Menua; Menu B Setting - Kenwood TS-50S Instruction Manual

7 MENU SET-UP
i a i ee
47
MENU B SET
Menu B contains those items listed in the table 3
below. These are the less frequently changed
functions. Use the following pracedure to change
the settings: 4
1 Press the F.LOCK button for more than two 5
seconds to enter the Menu Set-up mode.
MENU A
nm
feof
as
uu
=
2. If the A indicator appears, press the A/B button
to disnlav the B indicator
TING
The menu number appears at the left of the
display and the current setting appears at the
center.
Select the menu number using the tuning control.
Select the setting using the UP or DOWN button.
After you have changed a setting, press the CLR
or F.LOCK button to exit the Menu Set-up mode.
a z |
— Description Selection Default Reference
lo. page |
oe i de taitcainly Sean h a b e n tov oo Terk wn mie!
| Modulation mode select switches between ——i'ECtt i
St Morse(ON) or beep(OFF).
ON/OFF ON,
43
Alarm output switches bet Morse(ON) o}
52 beonOFF witches between Morse(ON) or ON/OFF ON 4a
53 Tone frequency select for repeater access (39 tones) a ee 88.5Hz 20, 29
Zz
Tone frequency type for repeater access.
| 54 | (p: burst, c: continuous) eee b/c c 20, 29
| 85 | Peak Meter Hold, _ ON/OFF ON 20
56 ay channel automatic increment after data is ON/OFF OFF =
Tuning control able to change frequency in Memo me ft aa
57 Channel mode. ' ) v ON/OFF OFF a
58 | Program Sean Hold. . ON/OFF ___OFF 39
Memory Protect 1. ON prevents writing to or clearin
59 | any Merion' channel. : 2 : ON/OFF: OFF 14,35
Memory Protect 2. ON prevents overwriting or Pern
60 clearing memory channeis containing data. ON/OFF OFF 14, 35
AM Broadcast band(522 to 1620 kHz) frequency step 7
61 size switches between two sizes in AM only. i S/MOkHz kHz a
(U.S.A./Canada: 522 to 1710 kHz) | I eres Slit
1 MHz button frequency step size switches between = |
LE 62 1MHz and 500 kHz. 1000/500kHz 1000kHz 15, 36, 41
63 | RIT maximum frequency shift switches between two | = 1.1/2.2kHz t.ikHz 41
values.
64 | Automatic Power Off. : ON/OFF | OFF 42
65 | PTT switch disable. ON prevents PTT from ON/OFF H OFF 49
functioning. i
66 | Microphone gain switches between high(H) or low(L). ; H/L L 22,26
67 | Microphone PF1 key assignment. i 00~99 83(Menu A) 49, 50
eee 00( Power
68 ' Microphone PF2 key assignment. 00-~39 pa 49, 50
69 'Microphone PF3 key assignment. 00~99 36(TF-SET) 49, 50
70 Microphone PF4 key assignment. o0~99 82(Monitor) 49, 50
7A! LSB transmit carrier point shift. (40 Hz steps) -100~ +200 000 44
72 __| USB transmit carrier point shift. (10 Hz steps) _ -100~ + 200 000 440
* U.S.A./Canada: 10 kHz(Use Menu A, No.17 to vary step size)