Beyerdynamic M 130 - Dynamic Double-Ribbon Microphone Manual

Beyerdynamic M 130 - Dynamic Double-Ribbon Microphone Manual

Also See for M 130:

Advertisement

Beyerdynamic M 130 - Dynamic Double-Ribbon Microphone Manual

BOX CONTENTS

  • 1 x M 130 microphone
  • 1 x MA-CL 25 microphone clamp
  • Storage case
  • Individual measurement chart
  • "M Series Guide" info sheet
  • Technical specifications on the M series

FEATURES

  • Dynamic double-ribbon microphone
  • Figure-eight polar pattern
  • Excellent suppression of lateral noise
  • High impulse fidelity and good transient response
  • Handcrafted in Germany

APPLICATION

The M 130 is ideal for stereo, room and instrument recordings and brings a popular and special ribbon sound that is characterised by warmth and precision. Depending on positioning and spatial situation, the M 130 can be used for studio recordings of drums, electric guitar amps, piano, acoustic guitars, orchestras, choirs or for all kinds of atmospheric recordings.

As a stereo microphone system, two M 130 can be used to create a Blumlein stereo system for an excellent sounding room recording. M/S recordings can be made together with a hypercardioid or supercardioid microphone such as the M 160 dynamic double-ribbon microphone or the MC 950 true condenser microphone.

TECHNICAL SPECIFICATIONS

Transducer type Dynamic
Operating principle Pressure gradient
Polar pattern Figure-eight
Frequency response 40 - 18,000 Hz
Rear attenuation at 1 kHz > 30 dB at 90°
Sensitivity (0 dB = 1 V/Pa) 1.3 mV/Pa (= -57.5 dBV)
Nominal impedance 200 Ω
Load impedance ≥ 1000 Ω
Diaphragm Pure aluminium
Case/finish Brass
Connector XLR, 3-pin, male
Dimensions:
  • Length
128 mm
  • Shaft diameter
23 mm
  • Head diameter
38.5 mm
Weight 160 g

FREQUENCY RESPONSE & POLAR PATTERN

This polar pattern and frequency response curve correspond to a typical production sample for this microphone.

FREQUENCY RESPONSE & POLAR PATTERN

INSTALLATION AND OPERATION

Connection

  • The M 130 is equipped with a 3-pin XLR connector. You can connect it to any microphone input using a suitable microphone cable.

  • Carelessly laid cables are a trip hazard. People can be injured and the microphone can be damaged.

Operation

  • The frequency-independent figure-eight polar pattern suppresses unwanted interference from the sides. Attenuation at 90° or 270° exceeds 30 dB. Therefore, position the microphone so that monitor speakers and other sources of interference radiate from the sides onto the microphone.
  • As the ribbons are in a vertical extension to the mi-crophone shaft, the microphone should be positioned vertically to the sound source.
  • The M 130 is supplied with the MA-CL 25 microphone clamp for tripods with 3/8" thread. For tripods with a 5/8" thread, you can unscrew the threaded insert.

  • A tripod with an insecure stand can fall over and damage a microphone mounted on it. Make sure the tripod stands stable.

MAINTENANCE

  • Use a soft cloth moistened with water to clean the microphone shaft and grille.
  • Make sure that no water enters the microphone.
  • Do not use cleaning agents containing solvents.

TROUBLESHOOTING AND SERVICE

  • Should you have technical problems when using the microphone or should you need more instructions, please visit our FAQ website at https://support.beyerdynamic.com
  • In case of service, please contact authorised service personnel. Never open the microphone yourself, as this could invalidate all warranty claims. Please visit our website https://www.beyerdynamic.com for service and replacement parts.

FURTHER INFORMATION

SAFETY INSTRUCTIONS

warning

  • Read this user manual and the safety instructions carefully before using the product.
  • Do not use the product if it is damaged.
  • Lay cables in such a way that no one can trip over the cables and that the device cannot be damaged.
  • Repairs may only be carried out by authorised specialists. Never open the microphone yourself. For devices that have been opened by the customer the warranty will invalidate.
  • Do not expose the product to rain, snow, liquids or moisture.
  • Use the device only under the conditions specified in the technical specifications.
  • Only use accessories and spare parts approved by the manufacturer.

  • Reduce the volume on the connected playback devices to prevent hearing damage, acoustic feedback and damage to the loudspeakers.

Intended use

warning Do not use the product in any way other than as described in this product manual. beyerdynamic accepts no liability for improper use of the product or its accessories.

Liability

warning beyerdynamic GmbH & Co. KG accepts no liability for damage to the product or injury to persons due to careless, improper or incorrect use, that is not in accordance with the purpose stated by the manufacturer.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Beyerdynamic M 130 - Dynamic Double-Ribbon Microphone Manual

Advertisement

Need help?

Need help?

Do you have a question about the M 130 and is the answer not in the manual?

Questions and answers

Table of Contents