Fast Internet Access; Connecting To The Router; Logging In - Ruijie Reyee RG-EW1300G Manual

Web-based Configuration Guide
1

Fast Internet Access

1.1

Connecting to the Router

You can open the management page and complete Internet access configuration only after connecting a PC to
the router. You can connect a PC to the router in either of the following ways.

Wired Connection
Connect a local area network (LAN) port of the router to the network port of the PC, and configure Obtain
an IP address automatically on the PC.

Wireless Connection
On a mobile phone or laptop, search for a Wi-Fi network @Ruijie-sXXXX (XXXX is the last four digits of the
MAC address of each device). The default SSID and login address can be found on the bottom label of the
router.
1.2

Logging in

After a PC connects to a router in the initial state, the configuration wizard page pops up. If the configuration
page does not pop up, enter the device IP address into the address bar of the browser to navigate to the login
page, and then enter the password for login.
Table 1-1 Default Configuration
Item
Device IP address（http or https）
Username/Password
Enter the IP address of the router (default: 192.168.110.1) or
browser, and press Enter. The login page is displayed.

Supported browsers: Google Chrome, and Internet Explorer 9 to 11. If an unsupported browser is used, you
may encounter various errors or problems such as garbled text or formatting errors.
Note
If you enter https://192.168.110.1
be displayed. Click Advanced > Continue to 192.168.110.1(unsafe) to open the login page.
in the address bar of your browser, and press Enter, the following page will
1
Default Value
192.168.110.1
No username and password are required at your first
login and you can configure the router directly.
https://192.168.110.1
Fast Internet Access
in the address bar of your