Auto-Off (Standby); Cup Warmer; Energy Saving; Coffee Temperature - DeLonghi PrimaDonna Elite Experience Manual

8.7 Auto-off (standby)

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
on the display (B), together with the current selection (15
or 30 minutes, or 1, 2 or 3 hours);
3. Press " " on the display to select the required value;
4. Press " " to go back to the homepage.
Auto-off is now programmed.

8.8 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press " " (B2) to enter the menu;
2. Press (B10) or
pears on the display (B);
3. Press " " to enable-
cup warmer.
4. Press " " to go back to the homepage.

8.9 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
appears on the display (B);
3. Press " " to enable-
energy saving.
4. Press " " to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.

8.10 Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
TURE" appears on the display (B) together with the current
selection (LOW, MEDIUM, or HIGH);
3. Press " " to select the required temperature;
4. Press " " to go back to the homepage.
Please note:
Varying the temperature has most effect for long beverages.
(B8) until " AUTO-OFF" appears
(B8) until " CUP WARMER" ap-
or disable-
(B8) until " ENERGY SAVING"
or disable-
(B8) until " COFFEE TEMPERA-

8.11 Water hardness

For instructions on setting water hardness, see section "20. Set-
ting water hardness".

8.12 Selecting the language

To modify the language of the display (B), proceed as follows:
"
1. Press "
2. Press (B10) or
appears on the display;
3. Press " " : press
flag corresponding to the required language;
4. Press "

8.13 Beep

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press " " (B2) to enter the menu;
the
2. Press (B10) or
the display (B);
3. Press " " to enable-
the beep;
4. Press "

8.14 Cup light

This function enables or disables the cup lighting.
The lights come on each time coffee beverages or hot milk is de-
livered and during each rinse cycle.
To disable or enable this function, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
pears on the display (B);
3. Press " " to enable-
cup lighting;
4. Press "

8.15 Background

You can choose the display background from the following 4
alternatives: "SHADED BLUE", "STAINLESS STEEL", "COFFEE
BROWN", "DARK BLUE". Proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
appears on the display (B);
3. Press " ". The available backgrounds appear on the
display;
4. Select the required background by pressing the chosen
panel. The appliance goes back to the settings menu with
the new background;
5. Press "
11
(B2) to enter the menu;
(B8) until "
or to display and select the
" twice to go back to the homepage.
(B8) until "
or disable-
" to go back to the homepage.
(B8) until " CUP LIGHTING" ap-
or disable-
" to go back to the homepage.
(B8) until "
" to go back to the homepage.
SET LANGUAGE"
BEEP" appears on
the
BACKGROUND"