Set Time; Auto-Start; Auto-Off (Standby); Cup Warmer - DeLonghi PrimaDonna Elite ECAM656.75.MS Manual

Please note!
• To change the beverages in another profile, go back to the
homepage, select the required profile (B11) and repeat the
procedure.
• To reset all the beverages in the profile to the default val-
ues, see section "8.19 Default values "

8.6 Set time

To adjust the time on the display (B), proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
on the display (B);
3. Press " ". The time setting panel appears on the display;
4. Press or corresponding to the hours and minutes
until the current time is displayed;
5. To confirm, press "
then press " " to go back to the homepage.
The time is now set.

8.7 Auto-start

You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section "8.6 Set time
To enable auto-start, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
pears on the display (B);
3. Select the function by pressing "
panel appears on the screen;
4. Press or corresponding to the hours and minutes
until the required auto-start time is displayed;
5. Press or
auto-start.
6. To confirm, press "
the settings menu by pressing "
" to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.
(B8) until " SET TIME" appears
" (to cancel, press "
").
(B8) until " AUTO-START" ap-
". The time setting
to enable or disable
" (or cancel and go back to
"), then press "

8.8 Auto-off (standby)

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
on the display (B), together with the current selection (15
or 30 minutes, or 1, 2 or 3 hours);
3. Press " " on the display to select the required value;
4. Press "
Auto-off is now programmed.

8.9 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press " " (B2) to enter the menu;
"),
2. Press (B10) or
pears on the display (B);
3. Press " " to enable-
cup warmer.
4. Press "

8.10 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
appears on the display (B);
3. Press " " to enable-
energy saving.
4. Press "
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.

8.11 Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or
TURE" appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAXIMUM);
3. Press " " to select the required temperature;
4. Press "
12
(B8) until " AUTO-OFF" appears
" to go back to the homepage.
(B8) until " CUP WARMER" ap-
or disable-
" to go back to the homepage.
(B8) until " ENERGY SAVING"
or disable-
" to go back to the homepage.
(B8) until " COFFEE TEMPERA-
" to go back to the homepage.
the