Advertisement
Quick Links
PUBLISHED Oct 2023
FILTER CLEANING LGH-50/80/100 RVS
intervals in order to prevent a deterioration in the Lossnay functions.
Guideline:
remote controller)
Clean the Lossnay cores if they are dirty.
should be increased depending on their dirtiness.)
WARNING
CAUTION
It could cause injury.
It could cause injury if parts fall.
Upper two screws are fastened
enough to remove the cover.
Maintenance cover
Maintenance cover
www.mitsubishi-electric.co.nz | 0800 784 382
are indicated on the
Lower two screws have fall
Maintenance cover for the other parts have also structure of
Maintenance cover
for the other parts
1. Pull out the upper part of the inner cover frontward and remove it
in the direction of the arrow in below picture.
it.
Inner cover
CAUTION
Use a vacuum cleaner to remove light dust. To remove stubborn
Vacuum cleaner
CAUTION
Complete Filter replacement for standard filters is 2
years maintenance cycle
While for the High efficiency filter that are used on
OA section is every 1 year maintenance cycle
Motor cable
Cable clamp
Advertisement
Related Manuals for Mitsubishi Electric Lossnay LGH-50 RVS
Summary of Contents for Mitsubishi Electric Lossnay LGH-50 RVS
- Page 1 PUBLISHED Oct 2023 FILTER CLEANING LGH-50/80/100 RVS intervals in order to prevent a deterioration in the Lossnay functions. Guideline: Maintenance cover for the other parts have also structure of are indicated on the remote controller) Clean the Lossnay cores if they are dirty. Maintenance cover should be increased depending on their dirtiness.) for the other parts...
- Page 2 LOSSNAY CORE CLEANING Hold the handle and draw the Lossnay cores out from the unit. Lossnay cores. Lossnay core CAUTION 2. Put the Lossnay core in a suitable vessel (e. g. a small tub or the shower tray) and rinse the Lossnay core with clear water from all sides.
- Page 3 DRAIN SIPHON CLEANING 1. Refer to 4.1 Removing the parts 1. Refer to 4.1 Removing the parts Lossnay cores. Lossnay cores. around the drain discharge holes with a soft cloth. Core rail part Drain pan causes the drain discharge hole clogging on both the air supply and clean the drain pan.