Advertisement
Quick Links
Diode Harness Kit
2024 Directional Drill
Model No. 138-5050
Model No. 138-5054
This product contains a chemical or chemicals known to the State of California
Installation
Installing the Diode on the 2024 Machine
1.
Move the machine to a level surface, shut off the engine, set the battery-disconnect switch to
remove the key.
2.
Disconnect the wire harness from the engine glow plug relay.
3.
Connect the diode to the glow plug relay and the other end into the wire harness.
4.
Secure the diode assembly using the cable ties.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
WARNING
CALIFORNIA
Figure 1
Form No. 3422-257 Rev A
Installation Instructions
Original Instructions (EN)
All Rights Reserved *3422-257* A
Printed in the USA
, and
OFF
g242097
Advertisement
Related Manuals for Toro 138-5050
Summary of Contents for Toro 138-5050
- Page 1 Form No. 3422-257 Rev A Diode Harness Kit 2024 Directional Drill Model No. 138-5050 Model No. 138-5054 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
- Page 2 g247477 Figure 2...
- Page 3 Installing the Diode on the 4045 or 4050 Machine Move the machine to a level surface, shut off the engine, and remove the key. Install the diode harness on the 4045 or 4050 machine as shown. Secure the diode assembly using the cable ties. g242242 Figure 3 g242241...