User Servicing Instructions; Grounding Instructions - DeWalt DXF1616 Instruction Manual

Extension Cord
Length
0 - 50 ft.
50 - 100 ft.
USER SERVICING
INSTRUCTIONS
This product employs overload protection (fuse).
A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse as
per the user servicing instructions (follow
product marking for proper fuse rating) and
check the product. If the replacement fuse
blows, a short-circuit may be present and the
product should be discarded or returned to
an authorized service facility for examination
and/or repair.
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
puling on cord.
2. Open fuse cover.
3. Remove fuse carefully.
4. Risk of re. Replace fuse only with 5 Amp,
125 Volt fuse.
5. Close fuse cover.
READ&SAVE THESE
INSTRUCTIONS
WARNING: Shock Hazard
U se this fan only in dry environments. This fan
is not intended for use in a bathroom, laundry
area, or similar locations, or near sinks, washing
machines, swimming pools or other sources
of water. Never locate fan where it may fall into
a bathtub or other water receptacle. Do not
basements.
WARNING: Hot Surfaces
Do not touch fan motor when in use. This
motor is hot when in use, to avoid burns, do
not let bare skin touch hot surfaces.
WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do
gases or sources of heat. DO NOT USE in
materials are used or stored. To prevent a
p
in any manner. Do not insert or allow foreign
Wire Gauge
objects to enter any ventilation or exhaust
A.W.G.
opening as this may cause an electric shock,
14
12
Do not use with damaged cord or plug. Use
with adequate electrical system that is up to
code.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock,
che
person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the
plug provided with the appliance-
the outlet, have a proper outlet installed by a
qua
Electric Shock
Do not use this product with any solid-state
speed control device.
GROUNDING
INSTRUCTIONS
In the event of malfunction or breakdown,
grounding provides a path of least resistance
for electric current to reduce the risk of electric
shock. The fan must be connected to a cord
having an equipment-grounding conductor and
a grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
equipment grounding conductor can result in
a risk of electric shock. The conductor with
insulation having an outer surface that is green
with or without yellow stripes is the equipment
grounding conductor. If repair or replacement
of the cord or plug is necessary, do not connect
the equipment-grounding conductor to a live
service person if the grounding instructions are
not completely understood, or if in doubt as to
whether the fan is properly grounded. Do not
modify the plug connected to the fan – if it will
FOR GROUNDED, CORD-CONNECTED
FAN RATED LESS THAN 15A AND
INTENDED FOR USE ON A NOMINAL 120V
SUPPLY CIRCUIT
WARNING:
Electrical Shock Hazard
WARNING: To Prevent Electric Shock
WARNING: To Reduce The Risk Of
DANGER:
Improper connection of the
ENGLISH
ician or service
ed electrician or
3