Philips 600 Series Manual page 17

The appliance still indicates that I need to
replace a filter, but I already did.
The Wi-Fi setup is not successful.
Notices
Electromagnetic fields (EMF)
Recycling
if anything drops into air outlet, it may also cause abnormal
loud sounds. Immediate turn off appliance, turn appliance
upside down, to get foreign objectives out of appliance.
Perhaps you did not reset the filter lifetime counter. Switch
on the appliance. Then press and hold the mode switch
button (
If the router your appliance is connected to is dual – band
and currently it is not connecting to a 2.4GHz network, please
switch to another band of the same router (2.4GHz) and try
to pair your purifier again. 5GHz networks are not supported.
Web authentication networks are not supported.
Check if the appliance is within range of the Wi-Fi router. You
can try to locate the air purifier closer to the Wi-Fi router.
Check if the network name is correct. The network name is
casesensitive.
Check if the Wi-Fi password is correct. The password is
casesensitive.
Retry the setup with the instructions in the chapter "Wi-Fi
connection".
The Wi-Fi connectivity can be interrupted by electromagnetic
or other interferences. Keep the appliance away from other
electronic devices that may cause interferences.
Check if the mobile device is in airplane mode. Make sure to
have the airplane mode deactivated when connecting to the
Wi-Fi network.
Consult the help section in the app for extensive and up-to-
date troubleshooting tips.
This appliance complies with the applicable standards and regulations regarding
exposure to electromagnetic fields.
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country's rules for the separate collection of electrical and electronic
products. Correct disposal helps prevent negative consequences for the
environment and human health.
) for 3 seconds until disappears.
English
17