Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Godox V1 Pro O
Summary of Contents for Godox V1 Pro O
- Page 1 合格证 TTL 锂电圆头机顶闪光灯 TTL Li-ion Round Head Camera Flash...
- Page 2 Please check the status and power of the lithium battery upon receipt. promptly. If there are any quality issues, please contact Godox or our authorized Dot not use damaged equipment or accessories. Allow professional repair dealer within the warranty period.
-
Page 3: Table Of Contents
TTL/M Mode Switch Function 15. Battery Compartment Screen Lock 16. Battery Remove Button 17. Sync Cord Jack Mode Lock 18. USB-C Upgrading Port The Reason & Solution of Not Triggering in Godox Control Panel 2.4G Wireless Other Applications Sync Triggering Bounce Flash ⑥... -
Page 4: Detachable Sub Flash
Detachable Sub Flash SU-1 Radio Transmission Shooting: Transmitter Unit (2.4G Wireless Transmitting) ② ① ⑦ ③ ① ⑧ ⑨ ④ 1. Flash Tube ② ⑩ 2. Detaching Pusher ⑤ LCD Panel ⑥ TTL Auto Flash 1. Radio Transmission Shooting 6. Group C: Receiver Unit Group C 2. -
Page 5: Battery
Battery Then rotate it to the right until it locks Detaching battery： Installing battery: Detaching the camera flash： Press and rotate the hot shoe fixing Press and hold the battery remove Insert the battery into the battery buckle to the left until it is loosened, button, then push the battery out compartment in the direction then take off the camera flash. -
Page 6: Fec (Flash Exposure Compensation)
Flash Mode — TTL: Auto Flash 1. Press function button 2<SYNC> so that the < > icon is displayed on the LCD panel. In TTL mode, the camera's metering system detects the flash reflected from the subject and automatically adjusts the flash output so that the subject and background are evenly exposed. -
Page 7: Flash Mode - Multi: Stroboscopic Flash
Note: 1. Multi flash is most effective with a highly reflective subject against a dark Note： 1. S1 and S2 optic control triggering is only available in M manual flash mode. background. 2. Press function 3 button <S1/S2> to switch between S1/S2 optic control or turn off 2. -
Page 8: Wireless Settings
Positioning and Operation Range (Example of wireless flash Wireless Settings shooting) You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to “OFF”, and the < > won’t be displayed on the LCD panel. Auto Flash Shooting with One Receiver Unit Setting the Flash as A Transmitter Unit Press <... -
Page 9: Id Settings
ID Settings 2. Receiver Unit Setting Press the wireless button and the Change the wireless channels and wireless ID to avoid interference for it can <RX> is displayed on the LCD panel, only be triggered after the wireless channels and IDs of the transmitter unit then the V1Pro S wirelessly controlled and the receiver unit are set to the same. -
Page 10: M: Wireless Flash Shooting With Manual Flash
Using Automatic Wireless Flash with Multiple Receiver Units 2. Set the Flash Output of Each Flash Group Press function button <M/A/B/C > When stronger flash output or more to choose a group. Turn the select convenient lighting operation is needed, dial to set the flash output of the increase the number of receiver units group, then press the set button to... -
Page 11: Ttl/M Mode Switch Function
In manual zoom mode, press the <ZOOM> button. The Reason & Solution of Not Triggering in Godox Turn the select dial to change the flash coverage. 2.4G Wireless If <... -
Page 12: C.fn: Setting Custom Functions
C.Fn: Setting Custom Functions Number of flashes that will activate over-temperature protection: Press the menu button to enter C.Fn settings. Power Output Level Number of Flashes Custom Function Signs Function Options Settings & Description 1/2 (+0.1~+0.9) m/ft Distance indicator 1/4(+0.1~+0.9) Feet 1/8(+0.1~+0.9) ZOOM... -
Page 13: Technical Data
7.2V/2980mAh Recycle Time Approx. 1.3 seconds. Green LED indicator will light 2. As the firmware upgrade needs the support of Godox G3 software, please download and install the "Godox G3 firmware upgrade software" before up when the flash is ready. - Page 14 Maximum EIRP Power: -10.82dBm 使用过程中正常的脱色，磨损和消耗，不是保修范围内的故障。 Declaration of Conformity GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in 产品保修 compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this 产品的保修期和服务类型按以下《产品保修信息》执行：...
- Page 15 If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot...
Need help?
Do you have a question about the V1 Pro O and is the answer not in the manual?
Questions and answers